Electrical and Electronics

IS 818 : 1968	Code of practice for Safety and Health Requirements in electric and gas welding and cutting operations.
IS 2148 : 2004	Electrical apparatus for explosive gas atmosphere – flameproof enclosures “d”
IS 2309 : 1989	Code of practice for the protection of buildings and allied structures against lightning.
IS 3043 : 1987	Code of practice for earthing.
IS 4691 : 1985	Degrees of protection provided by enclosure for rotating electrical machinery.
IS 5216 : 1982 Part I	Recommendations on safety procedures and practices in electrical work - General
IS 5216 : 1982 Part II	Recommendation on safety procedures and practices in electrical work – Life Saving Techniques
IS 5424 : 1969	Specification for rubber mats for electrical purpose
IS 5571 : 2000	Guide for selection of electrical equipment for hazardous areas.
IS 5572 : 1994	Classification of hazardous areas (other than mines) having flammable gases and vapours for electrical installation.
IS 5780 : 2002	Electrical apparatus for explosive gas atmospheres – Intrinsic safety “i” - specification
IS 6381 : 2004	Electrical apparatus for explosive gas atmospheres – Increased safety “e”
IS 6539 : 1972	Specification for intrinsically safe magneto telephones fo ruse in hazardous atmospheres
IS 7577 : 1986	Specification for Gas testing flame safety lamps
IS 7724 : 1975	Specification for sand filled protection of electrical equipment for use in explosive atmospheres
IS 7689 : 1989	Guide for the control of undesirable static electricity
IS 7820 : 2004	Electrical apparatus for explosive gas atmospheres – method of test for ignition temperature
IS 8239 : 1976	Classification of maximum surface temperatures of electrical equipment for use in explosive atmospheres
IS 8607 : 1983 Part 5	General and safety requirements for electrical equipment used in medical practice – protection against explosion hazards.
IS 8923 : 1978	Warning symbol for dangerous voltages
IS 8945 : 1987	Electrical measuring instruments for explosive gas atmospheres
IS 9249 : 1979 Part 1	Safety requirements for indicating and recording electrical measuring instruments and their accessories : common safety requirements for instruments.
IS 9249 : 1982 Part 2	Safety requirements for indicating and recording electrical measuring instruments and their accessories : safety requirements for instruments using a mains supply.
IS 9835 : 2001	Series Capacitors for power systems – General performance, testing and rating – safety requirements – guide for installation.
IS 11000 : 1988 Part 1	Fire hazard testing : Guidance for the preparation of requirements and test specifications for assessing fire hazard of electronic and electrical items, Sec 1 – General guidance
IS 11005 : 1984	Dust tight ignition proof enclosures of electrical equipment
IS 11713 : 1986 Part 1	Guide for physical planning of computer complexes :- Layouts
IS 11743 : 1986	Guide on human safety in design, manufacture, use and maintenance of electronic equipment
IS 12459 : 1988	Code of practice for fire safety in cable runs
IS 13925 : 1998 Part 1	Shunt capacitors for ac power systems having a rated voltage above 1000 V – general performance, testing and rating safety requirements – guide for installation and operation.
IS 13947:Part 5: Sec 2	Low voltage switch gear and control gear – specification – control circuit 2004 devices and switching elements – section 2 : Proximity switches
IS 14231 : 1995 Part 1	Cabled distribution systems for television and sound signals – specification – safety requirements
IS 14989:2001	Recommended practices for Seismic qualification of electrical equipment of the safety system for nuclear generating stations
IS 15111 : 2002 Part 1	Self Ballasted Lamps for general lighting services – safety requirements
IS 15451 : 2004	Electrical apparatus for explosive gas atmospheres – encapsulation “m”