Machinery / Operations

IS 659 : 1964	Safety Code for air conditioning (revised)
IS 818 : 1968	Code of practice for Safety and Health Requirements in electric and gas welding and cutting operations.
IS 1991 : 1988 Part 4	Safety requirements for the use, care and protection of abrasive grinding wheels: Safety guards.
IS 2825 : 1969	Code of unfired pressure vessels
IS 3233 : 1965	Glossary of terms for safety and relief valves and their parts
IS 3483 : 1965	Code of practice for noise reduction in industrial buildings
IS 5903 : 1970	Recommendations for safety devices for gas cylinders.
IS 6044 : 2000 Part 1	Code of Practice for Liquefied Petroleum Gas Storage Installations – Part 1 : Commercial and Industrial Cylinder Installations
IS 7155 : Part 1 to 8	Code of recommended practice for conveyor safety
IS 7194 : 1994	Assessment of Noise Exposure during work for hearing conservation purpose
IS 8089 : 1976	Code of safe practice for layout of outside facilities in an industrial plant
IS 8091 : 1976	Code of safe practice for industrial plant layout
IS 8216 : 1976	Guide for inspect ion of lift wire ropes
IS 8235 : 1976	Guide for safety procedures in hand operated hand tools
IS 8324 : 1988	Code of practice for safe use and maintenance on non-calibrated round steel link lifting chains and chin slings
IS 8433 : 1984	Code of safe practice for visual inspection of dissolved acetylene gas cylinders
IS 9020 : 2002	Power Threshers – Safety Requirements
IS 9474 : 1980	Specification for principles of mechanical guarding of machinery
IS 10553 : 1983 Part 1	Requirements for chlorination equipment : General guidelines for chlorination plants including handling, storage and safety of chlorine cylinders and drums
IS 10224 : 1982	Ergonomic principles in the design of work systems
IS 11006 : 1984	Specification for flash back arrestor (flame arrestor)
IS 11016 : 1984	General safety requirements for machine tools and their operation.
IS 11461 : 1985	Code of practice for compressor safety
IS 12735 : 1994	Wire rope slings – safety criteria and inspection procedures for use
IS 13367 : 1992 Part 1	Safe use of cranes – code of practice - General
IS 13583 : 1993 Part 1	Cranes – Training of drivers : General
IS 14817 : 2004 Part 2	Mechanical Vibration – Evaluation of machine vibration by measurements on non-rotating parts – large land – based steam turbine generator sets in excess of 50 MW
IS 14817 : 2004 Part 4	Mechanical Vibration – Evaluation of machine vibration by measurements on non-rotating parts – Gas Turbines driven sets excluding aircraft derivatives.